The Elios CARPORT4 (3P×11) is a heavy-duty aluminum carport mounting structure designed for four vehicles, supporting thirty 144-cell solar panels (panel size: 2278 × 1134 × 35 mm). The structure is fully aluminum, waterproof, and includes all required end and mid clamps, along with an integrated rain-management system. A durable, clean, and easy-to-install solar carport solution for high-capacity, multi-vehicle parking applications. (Structure only)

Industrial 1800 RPM generator equipped with a soundproof enclosure and a 150 L double-wall sub-base fuel tank.
• Power: 12 kW emergency / 11 kW continuous – 120/240 VAC, 1 ph, 60 Hz
• Engine: Yanmar 3TNV88F-UG6GE, Tier IV Final certified
• Alternator: High-capacity Mecc Alte industrial alternator
• Protection: ABB main breaker
• Batteries: Maintenance-free starter batteries with cables, terminal caps, and battery isolator switch
• Cold-weather starting: Engine block heater installed + glow plugs on the engine and on the air intake
• Fuel tank: Integrated 150 L double-wall sub-base tank
• Autonomy: Up to 50 hours at 80% load / 90 hours at 50% load
• Intelligent control: SmartGen controller with Wi-Fi module included for remote monitoring

Industrial 1800 RPM generator equipped with a soundproof enclosure and a 150 L double-wall sub-base fuel tank.
• Power: 12 kW emergency / 11 kW continuous – 120/240 VAC, 1 ph, 60 Hz
• Engine: Yanmar 3TNV88F-UG6GE, Tier IV Final certified
• Alternator: High-capacity Mecc Alte industrial alternator
• Protection: ABB main breaker
• Batteries: Maintenance-free starter batteries with cables, terminal caps, and battery isolator switch
• Cold-weather starting: Engine block heater installed + glow plugs on the engine and on the air intake
• Fuel tank: Integrated 150 L double-wall sub-base tank
• Autonomy: Up to 50 hours at 80% load / 90 hours at 50% load
• Intelligent control: SmartGen controller with Wi-Fi module included for remote monitoring

The Elios Carport M15 (3P×5) is a heavy-duty aluminum carport mounting structure designed for two vehicles, supporting fifteen 144-cell solar panels (panel size: 2278 × 1134 × 35 mm). The structure is fully aluminum, waterproof, and includes all required end and mid clamps, along with an integrated rain-management system. A durable, clean, and easy-to-install solar carport solution for dual-parking applications. (Structure only)

The Hyxi Power DMU Antenna Extension Cable 10 m (33.3 ft) is designed to improve communication between your DMU (Data Management Unit) and network connections by allowing flexible antenna placement while maintaining reliable signal performance. This extension cable supports WiFi, 4G-MAT, 433 MHz, and 868 MHz MAT antennas, making it a practical accessory for optimizing monitoring system connectivity.

The DMU Antenna 433 & 868 MHz from HYXi is a dual-band RF antenna designed for use with the Data Management Unit (DMU) in HYXi microinverter systems, providing reliable wireless communication on both the 433 MHz and 868 MHz frequency bands to optimize data transmission between microinverters and the DMU over the Sub-1 GHz network. This antenna enhances signal range and reliability in varying installation environments — including rooftop and metal-roof installations — helping ensure consistent and robust data collection for system performance tracking and analysis. It is a key accessory for achieving effective wireless communication in solar PV systems requiring long-range and stable RF connectivity.

The DMU Wi-Fi & 4G antenna is an RF accessory designed for use with the Data Management Unit (DMU) of HYXi microinverter systems to enhance wireless signal reception and transmission over Wi-Fi and 4G networks. It helps improve the range, stability, and reliability of the connection between the DMU and network access points or the cloud monitoring service, which is critical for smooth telemetry of microinverter performance data to the monitoring platform. This antenna is especially valuable in environments where wireless signals may be weakened by obstacles or metal structures, ensuring robust and continuous communication between the solar installation and remote performance analytics.

This is the microinverter branch cable, consisting of 1 T-junction and a 1.6-meter (5.25 ft) 10 AWG branch cable. The cable can be combined into a longer trunk cable as needed for the project, using the T-JB-RET and a screwdriver. Before combining into a longer trunk cable, calculate the maximum load for the entire trunk cable based on the microinverter current specifications, applying the 80% rule. The cable provides necessary protection for typical installation environments when no live circuits are exposed. Actual overall protection performance may vary depending on the installation.

The MultiPlus-II is a multifunctional inverter/charger with two AC outputs. Suitable for professional marine, yachting, vehicle, and land-based off-grid systems, it also provides the isolation and redundancy required for ESS setups. PowerControl allows the MultiPlus-II to prevent grid or generator overload, while PowerAssist boosts AC power during peak demand. In the event of an outage, the inverter switches over in milliseconds, keeping computers and sensitive electronics running without interruption. The battery charger combines speed with efficiency through a smart adaptive algorithm that extends battery life. 

The Elios Terra G4-6 with 2 legs is a robust and reliable ground-mount system designed to securely support 4 or 6 solar panels (72/144 cells. Featuring an optimized 35° tilt angle, it promotes efficient energy production while ensuring excellent structural stability. Manufactured from high-quality, weather-resistant materials, it provides long-term durability and straightforward installation. Engineered to withstand demanding climate conditions, the Terra G4-6 supports wind speeds up to 55 m/s and snow loads up to 2.87 kN/m², making it an ideal solution for residential, commercial, and off-grid solar projects.

The Elios Terra G8-10 with 2 legs is a robust and reliable ground-mount system designed to securely support 8 or 10 solar panels (72/144 cells). Featuring an optimized 35° tilt angle, it promotes efficient energy production while ensuring excellent structural stability. Manufactured from high-quality, weather-resistant materials, it provides long-term durability and straightforward installation. Engineered to withstand demanding climate conditions, the Terra G8-10 supports wind speeds up to 55 m/s and snow loads up to 2.87 kN/m², making it an ideal solution for residential, commercial, and off-grid solar projects.

Choose our solar kit comprising two 440W panels installed in portrait mode, including rails and all the hardware required for a solid and efficient installation.

Each panel measures 67.7 × 44.6 × 1.18 inches (1721 × 1133 × 30 mm).

Designed to be simple and scalable, this kit can easily be multiplied according to your needs: two rows of two panels (x2), three rows of two (x3), or four rows of two (x4).

Please note that solar cables, the inverter, and installation are not included.

Choose our solar kit comprising three 440W panels installed in portrait mode, including rails and all the hardware required for a solid and efficient installation.

Each panel measures 67.7 × 44.6 × 1.18 inches (1721 × 1133 × 30 mm).

Designed to be simple and scalable, this kit can easily be multiplied according to your needs: two rows of three panels (x2), three rows of three (x3), or four rows of three (x4).

Please note that solar cables, the inverter, and installation are not included.

Choose our solar kit comprising four 440W panels installed in portrait mode, including rails and all the hardware required for a solid and efficient installation.

Each panel measures 67.7 × 44.6 × 1.18 inches (1721 × 1133 × 30 mm).

Designed to be simple and scalable, this kit can easily be multiplied according to your needs: two rows of four panels (x2), three rows of four (x3), or four rows of four (x4).

Please note that solar cables, the inverter, and installation are not included.

The Elios T-Foot is specifically engineered for solar panel installations on sloped roofs, providing a secure and stable connection between mounting rails and the roof surface. Manufactured from anodized aluminum, it delivers excellent corrosion resistance, strong mechanical performance, and long-term durability in demanding outdoor environments. Featuring an integrated butyl adhesive tape, the T-Foot enhances waterproofing at the attachment point and helps prevent water infiltration. It also includes six pre-drilled holes designed for 2-inch wood screws, ensuring a secure fastening system and improved load distribution. Its lightweight design and pre-drilled slots allow for quick and efficient installation, making the Elios T-Foot a dependable choice for residential, commercial, and industrial solar applications. It streamlines racking systems while maintaining strong and reliable structural support.